Kia Optima: Temperature Control Actuator. Repair procedures

Temperature Control Actuator. Description and Operation

Description 1. Heater unit includes mode control actuator and temperature control actuator. 2. Temperature control actuator is located at the heater unit. It regulat ...

Inspection

1. Ignition "OFF" 2. Disconnect the connector of temperature control actuator. 3. Verify that the temperature control actuator operates to t ...

See also:

Muffler > Repair procedures
Removal and Installation 1. Remove the front muffler (B) after disconnecting the oxygen sensor connector (A). Tightening torque:39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ...

Replacement
1. Turn ignition switch OFF. 2. Disconnect the negative (-) battery cable. 3. Disconnect the TCM connector (A). 4. Re ...

Knock Sensor (KS). Description and Operation
Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knockin ...