Description
1. | Heater unit includes mode control actuator and temperature control actuator. |
2. | Temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. Signal from control unit adjusts position of temperature door by operating temperature switch and then temperature will be regulated by the hot/cold air ratio decided by position of temperature door |
Lighting Control
The light switch has a Headlight and a Parklight position.
To turn the lights on, twist the knob on the end of the control lever.
Parklight position ()
When the light switch is in the parklight p ...
Water pump. Repair procedures
...
Installation
1.
Install the balance shaft chain.
(Refer to Lubrication system in this group)
2.
Install the crankshaft chain
sprocket (B) and the timing chain oil jet (A).
...