Kia Optima: Specifications - General Information - Heating,Ventilation, Air Conditioning - Kia Optima TF 2011-2025 Service ManualKia Optima: Specifications

Specification

Air Conditioner
Item
Specification
Compressor
Type
6VSX16 (External variable displacement)
Oil type & Capacity
FD46XG(PAG) 100±10cc
Pulley type
6PK-TYPE
Displacement
160cc/rev
Condenser
Heat rejection
14,400 ± 5% kcal/hr
A/C Pressure transducer
The method to measure the pressure
Voltage = 0.00878835 * Pressure (psig) + 0.5
Expansion valve
Type
Block type
Refrigerant
Type
R-134a
Capacity [oz.(g)]
19.4 ± 0.88 (550 ± 25)

Blower Unit

Item
Specification
Fresh and recirculation
Operating method
Actuator
Blower
Type
Sirocco
Speed step
Auto + 8 speed (Automatic), 1~8 speed (Manual)
Speed control
Power mosfet (Auto) , Resistor (Manual)
Air filter
Type
Particle filter

Heater And Evaporator Unit

Item
Specification
Heater
Type
Pin & Tube type
Heating capacity
4,850 - 5% kcal/hr
Mode operating method
Actuator
Temperature operating method
Actuator
Evaporator
Temperature control type
Evaporator temperature sensor
A/C ON/OFF [°C(°F)]
ON : 2.1 ± 0.5 (35.7 ± 32.9)
OFF: 0.6 ± 0.5 (33.0 ± 32.9)


General Information
...

Troubleshooting
Troubleshooting Problem Symptoms Table Before replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigerant charge, air flow or compr ...

See also:

Repair procedures
Inspection [System Inspection] 1. Disconnect the vapor hose from the throttle body and connect a vacuum pump to the nipple on the throttle body. 2. Chec ...

Installation
• Install the component with the specified torques. • Note that internal damag ...

Seat height (for driver’s seat)
Pull the front portion of the control switch up to raise or down to lower the front part of the seat cushion. Pull the rear portion of the control switch up to raise or down to lower the rear pa ...

Copyright © www.kiopman.com 2025