Kia Optima: Interior

Component Location Index

Engine Room 1. Receiver Drier 2. Condenser 3. Service Port (High) 4. Service Port (Low) 5. A/C Pressure Transducer 6. Compressor 7. Expansion Val ...

Compressor Oil. Repair procedures

Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. ...

See also:

Inspection
1. Check the bushing for wear and deterioration. 2. Check the rear lower arm for deformation. 3. Check the coil spring and spring pad for deterior ...

Inspection
1. The windshield deicer switch inputs can be checked using the GDS. 2. To check the input value of windshield deicer switch, select option "Body Control Module& ...

Installation
1. Install the wiper motor. 2. Install the crank arm. Tighting torque:24.5 ~ 26.4Nm (2.5 ~ 2.7, kgf.m, 18.0 ~ 19.5 lbf.ft) ...