Front brake pads
1. | Loosen the guide rod bolt (B)
and pivot the caliper (A) up out of the way.
|
2. | Replace pad shim (D), pad retainers
(C) and brake pads (B) in the caliper carrier (A).
|
If the engine overheats
If your temperature gauge indicates overheating,
you will experience a loss of
power, or hear loud pinging or knocking,
the engine is probably too hot. If this happens,
you should:
1. Pull of ...
Removal
Parking Brake Pedal [Foot type]
1.
Turn ignition OFF and disconnect
the negative (-) battery cable.
2.
Remove the crash pad lower panel
and reinforcing panel. (Refer t ...
Rail Pressure Sensor (RPS). Specifications
Specification
...