1. | Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. |
2. | Remove the roof trim. (Refer to the Body group- Interior) |
3. | Disconnect the curtain airbag
harness connector (A).
|
4. | After loosening the mounting bolts and nuts remove the curtain airbag. |
Disassembly
1.
Remove the snap ring (A).
2.
Remove the hub assembly from
the knuckle assembly.
(1)
Install the front knuckle
assembly (A) on press.
...
Driving in Flooded Areas
Avoid driving through flooded areas unless you are sure the water is no higher
than the bottom of the wheel hub. Drive through any water slowly. Allow adequate
stopping distance because brake perf ...
Rail Pressure Sensor (RPS). Specifications
Specification
...