Kia Optima: Rear Upper Arm. Repair procedures - Rear Suspension System - Suspension System - Kia Optima TF 2011-2022 Service ManualKia Optima: Rear Upper Arm. Repair procedures

Inspection
1. Check the rubber parts for wear and deterioration. 2. Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound du ...

Removal
1. Remove the rear wheel & tire. Tightening torque:88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

See also:

Body Side Moulding Repair procedures
Replacement Roof Moulding Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related ...

Measurement Method
Projected Dimensions 1. These are the dimensions measured when the measurement points are projected into the reference plane, and are the reference dimensions used for b ...

Digital Clock
When the ignition switch is in the ACC or ON position, the clock buttons operate as follows: A digital clock will not be installed if your vehicle comes equipped with an audio system. Vehicles ...

Copyright © www.kiopman.com 2022