Kia Optima: Rear Stabilizer Bar. Repair procedures

Inspection

1. Check the bushing for wear and deterioration. 2. Check the rear lower arm for deformation. 3. Check the coil spring and spring pad for deterior ...

Replacement

1. Remove the rear wheel & tire. Tightening torque:88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

See also:

Inspection
Lighting Switch InspectionWith the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the multi-functio ...

Components and Components Location
Components Location 1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) #1 3. Intake Air Temperature Sensor (IATS) 4. Manifold Absolute Pressure Sensor ...

Fuel Tank Pressure Sensor (FTPS). Description and Operation
Description Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system. It is installed on the fuel tank near the fuel pump assembly. It checks the evaporative s ...