1. | Check the rear stabilizer bar for deformation. |
2. | Check the rear stabilizer link ball joint for damage. |
Front Impact Sensor (FIS). Description and Operation
Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They are
remote sensors that detect acceleration due to a collision at its mounting location.
The primary pur ...
Inspection
[Fuel pump]
1.
Turn the ignition switch OFF, and then remove battery
(-) cable.
2.
Remove the fuel pump assembly.
3.
Check motor operatio ...
Measurement Method
Projected Dimensions
1.
These are the dimensions measured
when the measurement points are projected into the reference plane, and
are the reference dimensions used for b ...