Kia Optima: Rear Lower Arm. Repair procedures

Inspection

1. Check the bushing for wear and deterioration. 2. Check the rear lower arm for deformation. 3. Check the coil spring and spring pad for deterior ...

Removal

1. Remove the rear wheel & tire. Tightening torque:88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

See also:

Removal
[Without EPB] 1. Remove the rear wheel & tire. Tightening torque:88.3 ~107.9 N.m(9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft) 2. Rem ...

Knock Sensor (KS). Description and Operation
Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knockin ...

3 Point Rear Center Belt
To fasten the rear center belt 1. Slowly pull the tongue plates out from the retractor. 2. Insert the tongue plate (A) into the open end of the buckle (C) until an audible “click" is hear ...