Circuit Diagram
Removal
1.
Remove the timing chain. (Refer
to Timing system in this group)
2.
Install a stopper pin (A) after
compressing the balance shaft chain tensioner.
3.
...
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the
"ON" position.
2.
Cover the front sensor to stop
...
Fuel gauge
The fuel gauge indicates the approximate amount of fuel remaining in the fuel
tank. The fuel tank capacity is given in section 8. The fuel gauge is supplemented
by a low fuel warning light, whic ...