The current outside temperature is displayed in 1°C (1°F) increments. The temperature range is between -40°C ~ 60°C (-40°F~140°F).
• The outside temperature on the display may not change immediately like a general thermometer to prevent the driver from being inattentive.
Rain Sensor Repair procedures
Inspection
Rain Sensing Wiper
1.
In IGN2 ON state, if auto switch input (LIN communication) is
ON then both wiper low relay and wiper high relay outputs are
controlled by the rain sensor inpu ...
Fuel Filler Door Open Switch. Repair procedures
Inspection
1.
Remove the driver door trim.
(Refer to the BD group - "Front door")
2.
Remove the switch assembly connector
(A) from the door trim.
...
Installation
1.
Remove the ignition key from
the vehicle.
2.
Disconnect the battery negative
cable and wait for at least three minutes before beginning work.
3.
In ...