Kia Optima: Line Pressure Control Solenoid Vale. Schematic Diagrams

Line Pressure Control Solenoid Vale. Specifications

Specifications Direct control VFS[LINE Pressure]▷ Control type : Normal low type Control Pressure kpa(kgf/cm², psi) 500.14~9.81(5.1~0.1,72.54~1.42) ...

Line Pressure Control Solenoid Vale. Repair procedures

...

See also:

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and i ...

Installation
1. Make sure of the length of compressor mounting bolts, and then tighten it A→B→C→D order. Tightening torque :20.0~32.9N.m (2.04~3.36kgf.m, 14.7~24 ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the fuel pump service cover (A) in the trunk. 3. ...