Kia Optima: Line Pressure Control Solenoid Vale. Repair procedures

Line Pressure Control Solenoid Vale. Schematic Diagrams

Circuit Diagram ...

Inspection

1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between sensor signal terminal and sensor g ...

See also:

Disassembly
1. Remove the snap ring (A). 2. Remove the hub assembly from the knuckle assembly. (1) Install the front knuckle assembly (A) on press. ...

Anchor Pretensioner (APT). Description and Operation
Description Front seat belt anchor pretensioner operates as well as belt pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on fron ...

Fuel Filler Door Release Actuator. Repair procedures
Inspection 1. Remove the trunk room left side trim.(Refer to the BD group - "Interior trim") 2. Remove the fuel filler door release actuator (A) after ...