Kia Optima: Installation
| 1. |
Install the multimedia jack. |
| 2. |
Connect the multimedia jack connector. |
| 3. |
Install the console upper cover. |
| 4. |
Install the shift lever knob.
|
Make sure the multimedia connector and the console upper cover connectors
are plugged in properly. |
|
1.
Remove the shift lever knob.
(Refer to the BD group - "Console")
2.
Remove the console upper cover
(A).
3.
Disconnect the conn ...
See also:
Trunk Lid Knob Lock
If the trunk lid lock knob (located near the latch) is in the “LOCK” position
when the trunk lid is closed, it will not be possible to open the trunk lid by using
the remote release. In this ...
Installation
1.
Installation is reverse of removal.
Filler-neck assembly bracket installation
bolt :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3
lb-ft)
Filler-neck as ...
To defrost outside windshield
1. Set the mode selection switch to the
position.
When you select position, the system
automatically turns on the outside (fresh) air mode.
2. Set the temperature control knob to the extreme ...
Removal
Troubleshooting