Kia Optima: Installation - Filler-Neck Assembly. Repair procedures - Fuel Delivery System - Engine Control/Fuel System - Kia Optima TF 2011-2024 Service ManualKia Optima: Installation

1. Installation is reverse of removal.

Filler-neck assembly bracket installation bolt :

3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Filler-neck assembly installation screw :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)



Removal
1. Lift the vehicle. 2. Disconnect the fuel filler hose (A). 3. Disconnect the ventilation hose (B) from the fuel tank air filter. ...

Accelerator Pedal. Repair procedures
...

See also:

Fuse Replacement
WARNING - Fuse Replacement Never replace a fuse with anything but another fuse of the same rating. A higher capacity fuse could cause damage and possibly a fire. Never install a wire inst ...

Oil Pump. Components and Components Location
Components 1. Reaction shaft support assembly 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bushing-Housing 7. Reaction shaft 8. Bushin ...

Safety Belt Warning Light and Chime
As a reminder to the driver and passenger, safety belt warning light will blink for approximately 6 seconds each time you turn the ignition switch ON. If the driver's lap/shoulder belt is not f ...

Copyright © www.kiopman.com 2024