Kia Optima: Installation

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the EWGA connector (A). 3. Remove the shaft ...

Adjustment

1. Check that the waste gate turbo charger is cool enough to work. 2. Turn the ignition switch to OFF position. 3. Connect the diagnosti ...

See also:

Checking the Coolant Level
WARNING - Removing Radiator Cap Never attempt to remove the radiator cap while the engine is operating. Doing so might lead to cooling system and engine damage and could result in serio ...

Power Door Lock Actuators. Repair procedures
Inspection Front Door Lock Actuator Inspection 1. Remove the front door trim. (Refer to the BD group - "Front door") 2. Remove the front door module. ...

Antenna. Repair procedures
Inspection Glass Antenna Test 1. Wrap aluminum foil (A) around the tip of the tester probe (B) as shown. 2. Touch one tester probe to the glass antenna termin ...