Kia Optima: Inspection
| 1. |
Turn the ignition switch OFF. |
| 2. |
Disconnect the PCSV connector. |
| 3. |
Measure resistance between the PCSV terminals 1 and
2. |
| 4. |
Check that the resistance is within the specification.
Specification:
Refer to “Specification”
|
|
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the purge control solenoid valve connector
(A).
3. ...
See also:
Welcome light (if equipped)
When all the doors (and trunk) are locked and closed, the room lamp will come
on for about 15 seconds if any of the below is performed.
Without smart key system
- When the door unlock butto ...
Removal
1.
Turn the ignition switch OFF and disconnect the negative
(-) battery cable.
2.
Disconnect the accelerator position sensor connector
(A).
...
Parking on Curbed Streets
When parking your vehicle on an uphill grade, park as close to the curb
as possible and turn the front wheels away from the curb so that the front wheels
will contact the curb if the vehicle ...