Kia Optima: Input Speed Sensor. Repair procedures

Input Speed Sensor. Troubleshooting

Signal Waveform Fig 1) Input/Output speed sensor at low speedFig 2) Input/Output speed sensor at high speed ...

Inspection

1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

See also:

Removal and Installation
1. Disconnect the terminals from the battery. Tightening torque :(+) terminal (A) : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft) (-) terminal (B) : 4.0 ...

Installation
1. Make sure of the length of compressor mounting bolts, and then tighten it A→B→C→D order. Tightening torque :20.0~32.9N.m (2.04~3.36kgf.m, 14.7~24 ...

Removal
1. Remove the head lamp leveling unit connector (A). 2. Loosen the mounting bolts (3EA) of automatic head lamp leveling unit assembly. Tighting torq ...