1. Check fuel level.
2. With the ignition switch in the LOCK position, check all connectors at the ignition coil and spark plugs. Reconnect any that may be disconnected or loose.
3. Check the fuel line in the engine compartment.
4. If the engine still does not start, call an authorized Kia dealer or seek other qualified assistance.
Installation
1.
The key of crankshaft should
be aligned with the mating face of main bearing cap. As a result of this,
the piston of No.1 cylinder is placed at the top dead center on compression ...
Reassembly
1.
Wrap tape around the driveshaft
spline(TJ) to prevent damage to the boots.
2.
Apply grease to the joint boot
on the side of the wheel and install the boot.
...
Installation
1.
Installation is the reverse of
removal.
After replacement or reinstallation procedure of the valve body assembly, ...