Kia Optima: Fuel Delivery System
- Components and Components Location
- Repair procedures
- Fuel Tank. Repair procedures
- Fuel Pump. Repair procedures
- Fuel Filter. Repair procedures
- Filler-Neck Assembly. Repair procedures
- Accelerator Pedal. Repair procedures
- Delivery Pipe. Repair procedures
- High Pressure Fuel Pump. Repair procedures
Installation
•
Install the component with the specified
torques.
•
Note that internal damag ...
Components and Components Location
Components Location
1. Fuel Tank
2. Fuel Pump
3. Fuel Filter
4. Fuel Pressure Regulator
5. Canister
6. Fuel Tank Air Filter
7. Fuel Tank Band
8. Fuel Tank ...
See also:
Output Speed Sensor Specifications
Specifications
Type: Hall effect sensor
Operation condition (В°C)В°F((-)40 ~ 150)) -104 ~ 302Air gap(mm)in.(0.25 ~ 1.9)0.00984 ~ 0.0748Output voltageHigh1.18 ~ 1.68Low0.59 ~ 0.84
...
Inspection
With the power seat switch in each position, make sure that continuity exists between
the terminals below. If continuity is not as specified, replace the power seat switch.
A : Power seat control s ...
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 4 and 5 [B1/S1].
Measure resistance between the HO2S termina ...
Copyright © www.kiopman.com 2022