Kia Optima: Front Wheel Speed Sensor. Components and Components Location

Installation

1. Installation is the reverse of removal. 2. Tighten the HECU mounting bolts and nuts to the specified torque. 3. After installation, bleed the b ...

Front Wheel Speed Sensor. Repair procedures

...

See also:

Steering Angle Sensor. Description and Operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line.The SAS is used to determine turning di ...

Installation
1. Make sure of the length of compressor mounting bolts, and then tighten it A→B→C→D order. Tightening torque :20.0~32.9N.m (2.04~3.36kgf.m, 14.7~24 ...

Installation
1. Install the balance shaft chain. (Refer to Lubrication system in this group) 2. Install the crankshaft chain sprocket (B) and the timing chain oil jet (A). ...