Kia Optima: ETC (Electronic Throttle Control) System. Description and Operation

ECM Problem Inspection Procedure

1. TEST ECM GROUND CIRCUIT: Measure resistance between ECM and chassis ground using the backside of ECM harness connector as ECM side check point. If the problem is found, repa ...

Description

The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cable, an Accele ...

See also:

Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the heater comtral module. (Refer to the HA group - "Controller") ...

Rear Cross Member. Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque:88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Special Service Tools
  Tool (Number and name) Illustration Use Crankshaft front oil seal installer (09214-3K000) (09231-H1100) Install ...