Kia Optima: Electronic Parking Brake (EPB). Repair procedures

EPB connector input/output

Pin No. Function Pin No. Function 1 - 21 Gear switch 2 - 22 ...

Remove

1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer to Body – “Crash pad�) 3. Dis ...

See also:

TCS ON/OFF MODE
In the TCS ON mode, the indicator in the instrument cluster will not be illuminated. The indicator will illuminate when the ignition key is turned to the “ON� position, but should go off after ...

Removal and Installation
1. Disconnect the ignition coil connectors (A). 2. Remove the ignition coils (A). Tightening torque :3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2. ...

Control System Composition
Fault DiagnosisFeatures a fail-safe mechanism that prevents dangerous situations from developing in the event of a transaxle failure. The limp home mode engages if the transaxle malfunctions. ...