Kia Optima: Electric WGT Control Actuator. Specifications - Engine Control System - Engine Control/Fuel System - Kia Optima TF 2011-2026 Service ManualKia Optima: Electric WGT Control Actuator. Specifications

Specification

[EWGA Position Sensor]
Position
Output  Voltage[V]
Operating Angle[°]
Range of Rod [mm], reference
Mechanical Close end stop Position (MCP)
4.8
0
0
Electrical Close end stop Position (ECP)
4.2
12
1.8
Electrical Open end stop Position (EOP)
1
79
16
Mechanical Open end stop Position (MOP)
0.5
90
18

[EWGA DC Motor]

[EWGA DC Motor]
Item
Specification
Coil Resistance (Ω)
1.48 ~ 1.96 [21°C(69.8°F)]


Electric WGT Control Actuator. Components and Components Location
Components 1 . Housing 2 . Cover 3. Sealing Cover 4 . Motor 5. Pinion 6 . Shaft Gear 7 . PCB Assembly 8 . Middle Gear 9 . Lever 10 . Lever Pin 11 ...

Electric WGT Control Actuator. Troubleshooting
Signal Waveform ...

See also:

Closing the hood
1. Before closing the hood, check the following: All filler caps in engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the eng ...

Power windows
The ignition switch must be in the ON position for power windows to operate. Each door has a power window switch that controls the door's window. The driver has a power window lock switch whic ...

Recommended SAE Viscosity Number
✽ NOTICE Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas an ...

Copyright www.kiopman.com 2026