Traction Control Indicator Lights
The TCS indicator will
illuminate when the ignition key is turned to the “ON” position, but should go off
after 3 seconds. It means the TCS is in the stand-by status and at the moment of
the act ...
Inspection
1.
Measure terminal-to-terminal
resistance of the blower resistor.
2.
measured resistance is not within
specification, the blower resistor must be replaced. (After re ...
Cleaning
1.
Make sure the ignition switch and all accessories
are in the OFF position.
2.
Disconnect the battery cables (negative first).
3.
...