Kia Optima: Driveshaft and axle

Adjustment

Adjusting method for T/M control cable 1. Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" pos ...

General Information

...

See also:

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gros ...

Oil Pressure Switch. Repair procedures
Inspection 1. Check the continuity between the terminal and the body with an ohmmeter.If there is no continuity, replace the oil pressure switch. 2. Ch ...

Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle or battery, follow these jump starting procedures. If in doubt, we strongly r ...