Kia Optima: Description
and Operation
Description
The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable.When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear.The contacts close and the starter motor cranks. In order to prevent damage caused by excessive rotation of the starter armature when the engine starts, the clutch pinion gear overruns.
|
1.Solenoid 2.Brush assembly 3.Armature 4.Overrun clutch |
Starting System
...
Repair
procedures
Starter Circuit Troubleshooting
The battery must be in good condition and fully charged.
1.
Disconnect the fuel ...
See also:
Rear Glass Defogger Printed Heater. Repair procedures
Inspection
Wrap tin foil around the end of the voltmeter test lead to prevent damaging
the heater line. Apply finger pressure on the ...
Removal
1.
Disconnect the battery negative
cable and wait for at least three minutes before beginning work.
2.
Remove the driver airbag module
from the steering wheel after p ...
Fuel Filler Door Release Actuator. Repair procedures
Inspection
1.
Remove the trunk room left side
trim.(Refer to the BD group - "Interior trim")
2.
Remove the fuel filler door release
actuator (A) after ...
Categories
Kia Optima Manuals
- Kia Optima DL3 2019-2026 Owners Manual
- Kia Optima DL3 2019-2026 Service and Repair Manual
- Kia Optima TF 2011-{2019} Owners Manual
- Kia Optima TF 2011-2026 Service Manual
- Kia Optima MS/Magentis 2000-2005 Owners Manual
