Kia Optima: Cylinder Head Assembly

Installation

1. Install the balance shaft chain. (Refer to Lubrication system in this group) 2. Install the crankshaft chain sprocket (B) and the timing chain oil jet (A). ...

Camshaft. Repair procedures

...

See also:

Removal
Handle the sensor with care. 1. Remove the tire. (Refer to "Tire Removal") 2. Remove the va ...

Yaw-rate and Lateral G Sensor. Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the floor console. (Refer to the Body group - Console) 3. ...

Non-operational conditions of rear parking assist system
The rear parking assist system may not operate properly when: 1. Moisture is frozen to the sensor. (It will operate normally when the moisture has been cleared.) 2. The sensor is covered with forei ...