Kia Optima: Center High-Mounted Stoplight Bulb Replacement
1. Remove the cover and turn the bulb socket counterclockwise and remove it from
the housing.
2. Push the bulb in, then rotate it one- quarter turn counterclockwise and remove
the bulb from the socket.
3. Insert a new bulb in the socket, then push the bulb in and rotate it one- quarter
turn clockwise.
4. Re-install the bulb socket into the cover and rotate it one-quarter turn clockwise
to lock the socket in place.
5. Re-install the cover.
License Plate Light Bulb Replacement
1. Using a Phillips screwdriver, remove the two (2) lens mounting screws and
the lens.
2. Rotate socket one-quarter turn counterclockwise and carefully pull the socket
from the housing.
3. Car ...
Trunk Room Light Bulb Replacement
1. Remove the trunk room lamp cover using flat blade screw driver.
2. After replacement of bulb, install the cover. ...
See also:
Fuel Pressure Control Valve. Description and Operation
Description
Fuel Pressure Regulator Valve is installed on the high pressure
fuel pump and controls fuel flow flowing into the injectors in accordance with
the ECM signal calculated based on var ...
One-Touch Wipers
For a single wiping cycle, push the lever forward and release it with the lever
in the OFF position.
The wipers will operate continuously if the lever is pushed forward and held.
✽ NOTICE ...
Components and Components Location
Components Location
1. Drive shaft
2. Lower arm
3. Front disk
4. Front strut assembly
5. Steering gearbox
6. Front stabilizer bar
7. Sub frame
...