Kia Optima: Brake Booster. Repair procedures

Components (3)

1. Vaccum hose 2. Tube mounting braket 3. Check valve 4. Intensifier ...

Brake Booster Operating Test

For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depresses fully the first time ...

See also:

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and i ...

Installation
1. Install the mirror assembly. 2. Install the mirror wiring cover and connector. ...

Purge Control Solenoid Valve (PCSV). Specifications
Specification Item Specification Coil Resistance (Ω) 19.0 ~ 22.0 [20°C(68°F)] ...