The alarm will be activated when:
The alarm will sound ON for 30 seconds, then OFF for 10 seconds. This ON/OFF cycle will be repeated three times. During this time, the engine will not start.
Installation
1.
Installation is the reverse of
removal.
2.
Use a SST (09581-11000) when
installing the brake caliper assembly.
3.
After installation, bleed ...
Removal
1.
Disconnect the battery negative
cable, and wait for at least three minutes before beginning work.
2.
To remove the seat belt anchor
pretensioner (C), keep on push ...
Parking brake
Type A
Type B
Checking the parking brake
Type A
Check whether the stroke is within specification
when the parking brake pedal is
depressed with 20 kg (44 lb, 196 N) of
force. Also, t ...