Kia Optima: Air Ventilation Seat. Description and Operation - Seat Electrical - Body Electrical System - Kia Optima TF 2011-2024 Service ManualKia Optima: Air Ventilation Seat. Description and Operation

Description

Using the blows power of FAN on seat, remove the moisture, sweat and warmth from occupants and surface of seats.

It inhales the indoor air through the blower installed at the seat cushion lower part, and supplies the air into the seat cushion and the seat back through the duct.

It sends a slight air throughout the seat surface through the air channel set up at seat cushion and seat back.
1. Make sure not to spoil drink or water on the seat when equipping with ventilation system seat
2. Because of inhaling the slight air, it is difficult to feel the air strength by the sense of touch.

Air Ventilation Seat. Schematic Diagrams
Circuit Diagram ...

Air Ventilation Seat. Repair procedures
...

See also:

Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the heater comtral module. (Refer to the HA group - "Controller") ...

Accelerator Position Sensor (APS). Description and Operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the RCV control solenoid valve connector. 3. Measure resistance between the valve terminals 1 ...

Copyright © www.kiopman.com 2024