Kia Optima: Accelerator Position Sensor (APS). Specifications - Engine Control System - Engine Control/Fuel System - Kia Optima TF 2011-2024 Service ManualKia Optima: Accelerator Position Sensor (APS). Specifications

Specification

Accelerator
Position
Output Voltage (V)
APS1
APS2
C.T
0.7 ~ 0.8
0.29 ~ 0.46
W.O.T
3.85 ~ 4.35
1.93 ~ 2.18


Accelerator Position Sensor (APS). Description and Operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors ...

Accelerator Position Sensor (APS). Schematic Diagrams
Circuit Diagram ...

See also:

Troubleshooting
Troubleshooting Symptom Possible cause Remedy Hard steering Improper front wheel alignment Excessive turning resistance of lower arm ba ...

Transmitter Code Registration (Using Code Saver)
1. Open Door. 2. Connect POWER (B+) and GND, signal line of Code Saver. 3. If connection is normal, signal line is activated and RED LED turns ON. ...

Installation
1. Apply a light coat of engine oil to the oil cooler packing surface (A), and then install the oil cooler with fix bolt (B). Tightening torque:44.1 ~ 53.9 N.m (4.5 ~ ...

Copyright © www.kiopman.com 2024