Kia Optima: Smart key unit. Components and Components Location

Smart key. Repair procedures

Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS. 2. Sel ...

Component (1)

Connector Pin Information No Connector A (14P) No Connector B (26P) 1 GND 1 1 - 15 ...

See also:

MAINTENANCE UNDER SEVERE USAGE CONDITIONS (T-GDI ENGINE)
The following items must be serviced more frequently on cars mainly used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace SEVE ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. ...

Checking the Engine Oil Level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait a few minutes for the oil to return to the oil pan. ...