Kia Optima: Removal
| 1. | Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
| 2. | Remove the front seat assembly. (Refer to the Body group- Front seat) |
| 3. | Loosen the seat belt buckle mounting
bolt and remove the seat belt buckle switch.
|
Installation
Be sure to install the harness wires so they will not pinch or interfere
with other parts.
1.
Remove the ignition key ...
See also:
Disassembly
•
Do not disassemble the
BJ assembly.
•
Special grease must be
applied to t ...
Inspection
1.
Check-points upon head lamp failure
(HID)
(1)
Check the battery voltage.
(Low beam will be on when the battery voltage above 9V.)
(2)
...
Electric WGT Control Actuator. Specifications
Specification
[EWGA Position Sensor]
Position
Output Voltage[V]
Operating Angle[°]
Range of Rod [mm], reference
Mechanical Close end ...
Categories
Kia Optima Manuals
- Kia Optima DL3 2019-2026 Owners Manual
- Kia Optima DL3 2019-2026 Service and Repair Manual
- Kia Optima TF 2011-{2019} Owners Manual
- Kia Optima TF 2011-2026 Service Manual
- Kia Optima MS/Magentis 2000-2005 Owners Manual
Copyright www.kiopman.com 2026