Kia Optima: Mode Control Actuator. Components and Components Location

Replacement

1. Disconnect the negative (-) battery terminal. 2. Using the screwdriver, remove the side cover (A). 3. Loosen the mounting screws and th ...

Mode Control Actuator. Description and Operation

Description The mode control actuator is located at the heater unit.It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select s ...

See also:

Using USB device
CAUTION IN USING USB DEVICE To use an external USB device, make sure the device is not connected when starting up the vehicle. Connect the device after starting up. If you start the engine w ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the manifold absolute pressure sensor connector (A). ...

Fuel Filter. Repair procedures
Replacement 1. Remove the fuel pump (Refer to “Fuel Pump” in this group). 2. Disconnect the electric pump wiring connector (A) and the fuel sender connecto ...