Removal
1.
Remove the ignition key from
the vehicle.
2.
Disconnect the battery negative
cable and wait for at least three minutes before beginning work.
3.
Re ...
Steering Angle Sensor. Description and Operation
Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering)
and it sends messages to HECU through CAN communication line.The SAS is used
to determine turning di ...
Reprogramming a Single HomeLink Button
To program a device to HomeLink using a HomeLink button previously trained, follow
these steps:
1. Press and hold the desired HomeLink button. Do not release until step 4 has
been completed.
2. ...