Kia Optima: Aluminum Wheel Maintenance
The aluminum wheels are coated with a clear protective finish.
- Do not use any abrasive cleaner, polishing compound, solvent, or wire brushes on aluminum wheels. They may scratch or damage the finish.
- Use only a mild soap or neutral detergent, and rinse thoroughly with water. Also, be sure to clean the wheels after driving on salted roads. This helps prevent corrosion.
- Avoid washing the wheels with high-speed car wash brushes.
Underbody Maintenance
Corrosive materials used for ice and snow removal and dust control may collect
on the underbody. If these materials are not removed, accelerated rusting can occur
on underbody parts such as the fu ...
Interior Care
...
See also:
Teaching Procedures
1.
Key Teaching ProcedureKey
teaching must be done after replacing a defective PCM(ECM) or when providing
additional keys to the vehicle owner.
The procedure starts with an PC ...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Specifications
Specifications
Direct control VFS[35R/C]▷ Control type : Normal low type
Control Pressure kpa(kgf/cm², psi)
500.14~9.81(5.1~0.1,72.54~1.42)
Curren ...
Removal
1.
Disconnect the battery negative
cable, and wait for at least three minutes before beginning work.
2.
Remove the front passenger seat
assembly.(Refer to the Body gr ...
Copyright © www.kiopman.com 2020