Kia Optima: Front Body. Body Repair

Measurement Method

Projected Dimensions 1. These are the dimensions measured when the measurement points are projected into the reference plane, and are the reference dimensions used for b ...

Front Body A

Hood hinge mounting hole (Ø10) Fender apron upper inner panel tooling hole (Ø6.6) Front sus ...

See also:

Rear Bumper. Repair procedures
Replacement • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the ...

Installation
1. Install the brake pedal assembly in dash panel. 2. Pre-tighten the bracket fixing bolt(B) in dash panel. 3. Install the brake boost ...

Removal
[Without EPB] 1. Remove the rear wheel & tire. Tightening torque:88.3 ~107.9 N.m(9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft) 2. Rem ...