Components Location
1. Injection hole(eyebolt) 2. Oil level plug 3. Oil drain plug |
Checking the amount of air conditioner refrigerant and compressor lubricant
When the amount of refrigerant is low, the performance of the air conditioning
is reduced. Overfilling also has a negative influence on the air conditioning system.
Therefore, if abnormal operation ...
Installation
1.
Installation is the reverse of
removal.
2.
Tighten the HECU mounting bolts
and nuts to the specified torque.
3.
After installation, bleed the
b ...
Inspection
With the power seat switch in each position, make sure that continuity exists between
the terminals below. If continuity is not as specified, replace the power seat switch.
A : Power seat control s ...