This gauge shows the temperature of the engine coolant when the ignition switch is ON.
Do not continue driving with an overheated engine. If your vehicle overheats, refer to If the engine overheats in section 6.
CAUTION
If the gauge pointer moves beyond the normal range area toward the H position, it indicates overheating that may damage the engine.
Manual Transaxle Operation
The manual transaxle has five forward gears. Press the clutch pedal down fully
while shifting, then release it slowly.
A special safety feature prevents inadvertent shifting from 5 (Fifth) to R ( ...
Mode Control Actuator Repair procedures
Inspection
1.
Ignition "OFF”
2.
Disconnect the connector of mode control actuator.
3.
Verify that the mode control actuator operates to the defrost
mode when connecting 12V to the term ...
Air Flow Control (Mode Switch)
The mode selection button controls the direction of the air flow through the
ventilation system.
The air flow outlet port is same as manual climate control system.
Face position
Air flow is dir ...