The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory.
Check the antifreeze protection and coolant level at least once a year, at the beginning of the winter season, and before traveling to a colder climate.
Vehicle Break-In Process
No special break-in period is needed. By following a few simple precautions for
the first 600 miles (1 000 km) you may add to the performance, economy and life
of your vehicle.
Do not race the ...
Installation
1.
Install the brake pedal assembly
in dash panel.
2.
Pre-tighten the bracket fixing
bolt(B) in dash panel.
3.
Install the brake boost ...
Rear Cross Member. Repair procedures
Replacement
1.
Remove the rear wheel & tire.
Tightening torque:88.3
~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...