Kia Optima: Button Engine Start System

Installation

Parking Assist Sensor 1. Connect the connector, and then install the sensor. 2. Install the rear bumper. Buzzer 1. Install the buzzer. 2. In ...

Components and Components Location

Component Location 1. Start Stop Button(SSB) 2. FOB key holder 3. FOB key 4. Trunk lid open switch 5. Smart key unit 6. RF receiver 7. Body control module ...

See also:

Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
Specifications Direct control VFS[T/CON]▷ Control type : Normal low type Control Pressure kpa(kgf/cm², psi) 9.81~500.14(0.1~5.1,1.42~72.54) Curren ...

Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the lens trunk trim. (Refer to the BD group - "Trunk") 3. Replace the bulb (A) ...

Reassembly
1. Install the hub bearing to the knuckle assembly. (1) Lay the knuckle assembly (A) on press. (2) Lay a new hub bearing upon the k ...