Kia Optima: 26 Brake Control Solenoid Valve(26/B_VFS). Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Optima TF 2011-2026 Service ManualKia Optima: 26 Brake Control Solenoid Valve(26/B_VFS). Specifications

Specifications

Direct control VFS[26/B]

▷ Control type : Normal low type

Control Pressure kpa(kgf/cm², psi)
9.81~500.14(0.1~5.1, 1.42~72.54)
Current value(mA)
50~850
 Internal resistance(Ω)
5.1


26 Brake Control Solenoid Valve(26/B_VFS). Description and Operation
Description 26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 brake. ...

26 Brake Control Solenoid Valve(26/B_VFS). Schematic Diagrams
Circuit Diagram ...

See also:

Power Out Side Mirror Switch. Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. (Refer to the BD group - "Front door") 3. ...

VSM (Vehicle stability management)
This system provides further enhancements to vehicle stability and steering responses when a vehicle is driving on a slippery road or a vehicle detected changes in coefficient of friction between ...

Interior light
When the interior light switch is in the DOOR position and all doors (and trunk) are locked and closed, the room lamp will come on for 30 seconds if any of the below is performed. Without smar ...

Copyright www.kiopman.com 2026