When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset.
WARNING
A wheel that is not the correct size may adversely affect wheel and bearing life, braking and stopping abilities, handling characteristics, ground clearance, body-to-tire clearance, snow chain clearance, speedometer and odometer calibration, headlight aim and bumper height.
Speakers Repair procedures
Inspection
1.
Troubleshooting for Speaker
(1)
Basic inspection of speaker
Inspect the sound from speaker after verifying that the
speaker mounting screws are removed and the wiring connector ...
Front Cross Member Repair procedures
Replacement
1.
Remove the front wheel & tire.
Tightening torque:
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1~79.6lb-ft)
Be careful not to damage to the hub bolts ...
TCS ON/OFF MODE
In the TCS ON mode, the indicator in the instrument cluster will not be illuminated.
The indicator will illuminate when the ignition key is turned to the “ON” position,
but should go off after 3 se ...