Kia Optima: Transaxle Oil Temperature Sensor. Description and Operation
Description
Transaxle oil temperature sensor monitors the automatic transaxle fluid's temperature and conveys the readings to TCM. It is an NTC (Negative Thermal Coefficient) sensor whose resistance has an inversely proportional relationship with the temperature level. Data produced by this sensor is used to identify damper clutch activation and deactivation zones within the low temperature and high temperature range and to compensate hydraulic pressure levels during gear changes.
Installation
1.
Installation is reverse of removal.
In the case of the vehicle equipped with immobilizer or but ...
Transaxle Oil Temperature Sensor. Specifications
Specifications
▷ Type: Negative Thermal Coefficient Type
Temp.[(°C)°F]
Resistance (kΩ)
(-40)-40
48.1
(-20)-4.0
...
See also:
Seat Heater (Non-Air Ventilation). Repair procedures
Inspection
First Seat Heater
1.
Check for continuity and measure
the resistance between No.4 and No.6 terminals.[Cushion]
No.
Description ...
Repair procedures
Inspection
1.
After disconnecting the vapor hose from the PCV valve,
remove the PCV valve. Visually check for a collapsed vapor hose or hose
leaks.
2.
...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
Categories
Kia Optima Manuals
- Kia Optima DL3 2019-2026 Owners Manual
- Kia Optima DL3 2019-2026 Service and Repair Manual
- Kia Optima TF 2011-{2019} Owners Manual
- Kia Optima TF 2011-2026 Service Manual
- Kia Optima MS/Magentis 2000-2005 Owners Manual
Copyright www.kiopman.com 2026