Kia Optima: To unfasten the front lap/shoulder belt
Press the release button on the buckle and allow the belt to slowly retract.
WARNING - Front Safety Belts
- The front seatbacks should always remain in a comfortable, upright position while the vehicle is in motion. The safety belt system will provide the most protection with the seatbacks in an upright position.
- Never wear the shoulder portion of the safety belt under the outside arm or behind the back.
- Never wear the shoulder portion of the safety belt across the neck or face.
- Wear the lap portion of the safety belt as low as possible. Be sure the lap belt fits snugly around the hips. Never wear the lap belt over your waist.
- Make sure the safety belts are not twisted while in use.
- Never use a single belt to restrain more than one person at a time.
Failure to follow these warnings will increase the chance and severity of injury in an accident.
To fasten the front lap/shoulder belt
1. Grasp the buckle and tongue plate.
2. Slowly pull the lap/shoulder belt out from the retractor.
3. Insert the tongue plate into the open end of the buckle until an audible “click”
is heard, ...
Rear safety belts
Two kinds of belts are provided:
Lap/shoulder belts for people who sit on the outboard sides of the rear
seat.
A lap belt for people who sit in the center of the rear seat.
Rear Lap/Should ...
See also:
Description
The Rain sensing windshield wiper system is a wiper system that, in addition to
providing normal wiper functions off, mist, manual low speed, manual high speed,
and wash, provides automatic contro ...
Removal
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the lower (A) after loosening
the mounting screws.(Refer to the BD group - "Crash pad")
...
Crankshaft Position Sensor (CKPS). Schematic Diagrams
Circuit Diagram
...
Copyright © www.kiopman.com 2023