Kia Optima: Securing a child restraint seat with “Tether Anchor” system
Child restraint hook holders are located on the package tray.

1.Route the child restraint seat tether strap over the seatback.
For vehicles with adjustable headrests, route the tether strap under the headrest and between the headrest posts, otherwise route the tether strap over the top of the seatback.
2.Connect the tether strap hook to the appropriate child restraint hook holder and tighten to secure the child restraint seat.
WARNING
When using the vehicle's "Tether Anchor" system to install a child restraint system in the rear seat, all unused vehicle rear seat belt metal latch plates or tabs must be latched securely in their seat belt buckles and the seat belt webbing must be retracted behind the child restraint to prevent the child from reaching and taking hold of unretracted seat belts. Unlatched metal latch plates or tabs may allow the child to reach the unretracted seat belts which may result in strangulation and a serious injury or death to the child in the child restraint.
WARNING - Tether strap
WARNING - Child restraint check
Check that the child restraint system is secure by pushing and pulling it in different directions. Incorrectly fitted child restraints may swing, twist, tip or separate causing death or serious injury.
WARNING
- Child restraint anchorage
Placing a passenger seat belt into the auto lock mode
Securing a child restraint seat with child seat lower anchor systemTire maintenance
In addition to proper inflation, correct
wheel alignment helps to decrease
tire wear. If you find a tire is worn
unevenly, have your dealer check the
wheel alignment.
When you have new tires ...
Manifold Absolute Pressure Sensor (MAPS). Schematic Diagrams
Circuit Diagram
...
Removal
•
DON’T remove the camshaft position sensor
while the engine is running or right after engine is turned
...