Kia Optima: Rear Shock Absorber. Repair procedures

Rear Shock Absorber. Components and Components Location

Components 1. Self locking nut 2. Bracket assembly 3. Bumper rubber 4. Dust cover 5. Shock absorber ...

Replacement

1. Remove the rear wheel & tire. Tightening torque:88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

See also:

Operation
Operating Procedure 1. Suspension angle change resulted from vehicle's load change. 2. Sensor angle change. 3. Microprocessor calculates necessary ...

Windshield Washers
In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 2-3 cycles. Use this function when the windshield is dirty. The spray and wiper ...

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between sensor signal terminal and sensor g ...